
|
Fourteen zone control and monitoring device GsmAlarm-220 can be used for protection of houses, apartments, garages, and cottages.
Features:
- 14 protected zones
- 5 programmable outputs
- 5 users are notified.
Datasheet
|
|
GSM 500
|
|
GsmAlarm-500 can be used to protect houses, apartments, cottages and to manage electrical devices (heating, ventilation systems, automated gates and fences) over GSM network.
Features:
- 6 inputs
- Up to 15 protection zones
- 3 programmable low current outputs + 1 high current relay output
- 5 users are notified
- Possibility to connect up to four keypads
- 20 programmable keypad access codes or iButton (DALLAS) keys.
5 inputs
- 1 output relay
- Audio call with text message
- Audio monitoring
Datasheet
|
|
GSM CG2 & GSM CG2 Kit
|
|
Stand alone GSM Alarm CG2 Panel available as PCB and as a full alarm system kit with battery and power supply.
Features:
- Sent data corresponds to the Contact ID codes
- Textual reports to up to 2 mobile phones by SMS messages are available
- 6 programmable inputs
- 3 ways to arm/disarm the security system
- 1+39 user codes to arm/disarm the security system
- 3 security modes ARM/STAY/OFF
- Zone bypass
- 6 programmable outputs PGM
- Possibility to control an output by SMS or by a free-of-charge call
- Internal pulse power supply unit
- USB port for configuration
|
|
GSM CG3 |
|
CG3 is an expandable to up to 32 inputs security control panel with pre-installed GSM communicator on the board.
Features:
- GPRS and/or SMS communication with a monitoring station
- Sent data corresponds to the Contact ID codes
- Text reports to up to 2 mobile phones by SMS messages are available
- 6 programmable inputs on the main board
- Possibility to expand system up to 32 programmable inputs
- Possibility to split alarm system in 8 separately arming partitions
- Possibility to connect up to 16 system expansion devices
- 3 ways to arm/disarm the security system
- 1+39 user codes to arm/disarm the security system
- 3 security modes ARM / STAY / OFF
- Zone bypass
- 6 programmable outputs (PGM)
- Possibility to control an output (PGM) by SMS or by a phone call
- Internal pulse power supply unit
- USB port for configuration
Datasheet
|
|
GSM ProCOMM & ProCOMM Kit
|
|
GSM ProCOMM is a stand alaone alarm system panel with built in
PSTN and 'Dual' SIM Card allowing for two GSM networks to back up
communications.
Available as bare PCB or as a complete kit with power supply and box.
Features:
- GSM and PSTN communication
- Call forwarding from alarming central using prefix numbers (channel preselection)
- Management of 2 independent SIM cards
- Forwarding of incoming SMS messages to 2 phone numbers
- Forwarding of alarming SMS and calls to 4 user phone number
- Conversion of event codes to SMS message sent by alarm device via GSM and PSTN channel
- Initiation of voice calls effected by alarm device via GSM and PSTN channel
- Configurable SMS message (max. 160 characters) for alarm transmission
- 9 recordable voice messages (5sec length) and a siren tone for alarm transmission
- Last 1137 events stored in event list
- Supports voice dialers
- 4 onboard NO/NC contact inputs
- Optional 24 input expansion module
- Configurable Contact IDs for every inputs and custom events
- 4 configurable NO/NC relay outputs (mono, bi, change state), controllable by events or by user
- Relay control by free calls (gate control function)
- Backup battery management, charging automatically and voltage monitoring
- Monitoring GSM and PSTN line
- Supply monitoring
- Built-in tamper protection
- Built-in microspeaker for line communication checking
- LED signals for status
- Configuring through USB and GSM data call
Datasheet
More Details
|
|
GSM GTA |
|
Features:
- 8 inputs
- 4 Analogue inputs
- 8 Digital outputs
- Text alarm per input when triggered & restored
- Support for monitoring station
- Status SMS
- GPRS version & server available
|
|