GSM-Secure
innovative Security, Control, Monitoring & Communication solutions using GSM 3G GPRS technology
GSM SecureTM
   Home      GSM Line Emulator

GSM Line Emulation & Simulation

GSM Secure offer a range of products to suit nearly every need for using the GSM networks for control & monitoring.  

Our products cover a range of applications and the tables below should help you decide which one is best for you. If you have any questions or need any further advice, please do not hesitate to contact us.
 

GSM Line simulation applications include:

  • Alarm system communication
  • PBX to mobile GSM network - allowing low cost calls using inclusive minutes
  • Fixed emergency handsets such as in lifts, help points and taxi call phones using 'hot dial'

 
GSM EasyLINE 

 

For locations where an alarm system needs to communicate via a landline but no line is available. By simulating the land line system, connected equipment 'hears' dial tone and when a call is made, it is sent via the GSM system.
 
The main uses for this device is to upgrade standard PSTN connected alarms to be able to communicate via GSM..
 
Suggested uses:
  • Alarm communication
  • Lift car emergency communication
  • Intercom upgrades
Features:
  • Telephone line emulator
  • PSTN line management, PSTN fail relay output (NC/NO)
  • SIA FSK and CONTACT ID protocols
  • Programmable through SMS Telephone line simulator

Datasheet  
 
 

GSM EcoLINE
 

For locations where an alarm system needs to communicate via a landline but no line is available. By simulating the land line system, connected equipment 'hears' dial tone and when a call is made, it is sent via the GSM system.
 
The main uses for this device is to upgrade standard PSTN connected alarms to be able to communicate via GSM.
 
Simple to install and compatable with all networks.
 
Suggested uses:
  • Alarm communication
  • Lift car emergency communication
  • Intercom upgrades
Datasheet  
 
 

GSM G7

 


GSM G7 is a communicator designed to transfer security control panel messages to a monitoring station via GSM.

Messages are transmitted to monitoring station via a specified primary connection. In case when the primary connection fails, the messages are transferred through a back up channel.
 
Datasheet
 
 
 
 
 
 

GSM G10

 


GSM G10 is the communicator applied for transmitting alarm signals from control panel to monitoring station over GSM.

GPRS, CSD or SMS channels can be used for transmitting alarm signals to monitoring station

For increasing probability of alarm signal transfer, G10 can transmit over main alarm reporting path and if it fails, alarm transmission will be performed over alternative GSM channel.
 
Datasheet
 
 
 
 
 
 

GSM ProLINE

 

 
For locations where an alarm system needs to communicate via a landline but no line is available. By simulating the land line system, connected equipment 'hears' dial tone and when a call is made, it is sent via the GSM system.
 
The main uses for this device is to upgrade standard PSTN connected alarms to be able to communicate via GSM..
 
Suggested uses:
  • Alarm communication
  • Lift shaft emergency communications
  • Intercom upgrades
Features:
  • Telephone line simulator
  • PSTN line management
  • 2 contact inputs , 1 OC output
  • Forwarding SMS and voice message
  • Contact ID, 4/2, SIA FSK, BELL103 protocol
  • Expand module for one more output
  • Programming via SMS and PC

Datasheet  
 


GSMAlarm 330

 


 
The device operates in connection with standard alarm systems and is designed for the transmission of alarm messages via GSM network.
 
Transmission of security system messages to an alarm monitoring station via CONTACT ID protocol.
Transmission of security system messages to user’s cell phone by SMS.
 
Datasheet
 

GSM MINI

 

 
Details:
 
For locations where no land line is normally available whether an for an alarm panel, fax machine or even to use a normal telephone handset, this product will give lane line dial tone to any connected equipment.
 
The main uses for this device is to back up a land line or can be used stand alone where no line is available. Should the land line be lost or damaged, a text message is sent to inform and the connected equipment connects via GSM until the line state recovers.
 
Ideal alternative to BT's RedCare service if cost is an issue and GSM back up is satisfactory.
 
Suggested uses:
  • Alarm communication
  • Alarm line monitoring 
  • Lift shaft emergency communications
  • Intercom upgrades
  • Emergency handsets 
  • Easy to install
  • Compatible with any network
  • Fixed number dialling
  • Line failure notification
Datasheet
 
 




 


 
 
Business hours (UK time)
Monday-Thursday: 09:00-17:00
Friday: 09:00 - 16:30
Saturdays: 11:00-13:00
Sundays: Closed
Answerphone operating outside these hours 
UK Local: 0161 354 5108
UK Local: 0161 660 2544
 
International: +44 161 354 5108
Ireland: +353 (0)15547217

 
Sign up for PayPal and start accepting credit card payments instantly.

 
IT & VoIP Telephony solutions provided by Equinox Communications
 
 
GSM Secure™ Distribution Ltd is a registered company: 6358080
VAT Number: 938 9152 82
 
GSM Secure
GSM Gate Opener - GSM Intercom - GSM Monitoring - GSM Control - GSM Communications
 
Find us on UK Security Company