innovative Security, Control, Monitoring & Communication solutions using GSM 3G GPRS technology
GSM SecureTM
   Home      GSM Control & Monitor      GSM ProCON

GSM ProCON Auto dialler & text notification system

ProCon GSM − Contact controlled industrial GSM transmitter

  • 4 contact inputs
  • 1 NO/NC relay output
  • Forwarding SMS and voice message to 8 phone numbers
  • Programming via SMS and PC
  • ContactID sending to the monitoring station
  • Expansion modules available

The system will send SMS and/or voice message if the signal reaches the input. You can set 8 different phone numbers to specify separately the type of notice.
The voice call can be siren sound or a pre-recorded voice message (basic text: 16 sec., message: 8 sec.).Event notification: input alarm, tamper, ext. power monitoring, life signal sending.
SMS message can be set individually or depending by the alarm event or from the restore. The ringing time of the call, the redial of the number and the function of the circular calling can be set separately.
The output can be controlled by voice call for free: unlimited number of cases (no check) or up to the memory of the SIM card (250 pcs). The output can be monostable (max. 65000 sec.) or bistable.
If you want to use it like an alarm control panel the input will be the zone and the output will control the siren, while the phone call will manage to arm/disarm the system.
SIM functions: forwarding of incoming SMS, warning message of the SIM expiring date, maintenance warning.
Calendar of events: 16 000 event buffer (input, output, GSM signal strength, tamper, power failure, output control based on the caller).
The battery pack allows the device to have a signal about a power failure and to operate for 24 hours.
Multiple SMS and full PC programming.
Expansion modules: output, temperature measurement, control panel, microphone connection.
Strength of the GSM signal is checked and logged in every hour into a seperate memory.
Technical parameters
  • Supply voltage: 11 V - 18 V
  • Standby current: 40 mA
  • Maximum current consumption: 400 mA
  • Relay output: max. 20 V, max. 0.5 A
  • GSM module type: 900 SIMCOM
  • GSM frequencies: GSM 850 / EGSM 900 / DCS 1800 / PCS 1900 (Multi-Band)
  • SIM interface: unlocked, support for all services
  • GSM antenna type: SMA connector
  • Battery charging time: 5 days (due to longer life)
  • Dimensions (length x width x height):
  • panel: 78 x 51 x 20 mm
  • packed: 132 x 128 x 32 mm
  • Operating temperature: -20°C - 50°C
  • GSM transmitter beside alarm system
  • Independent alarm system
  • Vocal alarm messages
  • Gate, barrier, and garage opening
  • Home automation control (air-conditioning, heating, sauna, lighting)
  • 230V control

This system offers allows quick upgrades to alarm panels and other equipment to allow it to send texts and voice calls when one of the inputs are triggered.
When one of the inputs are triggered, the unit will send out text messages 'Alarm 1 Activated' or 'Alarm 2 Activated' and follow these with a voice call to the pre programmed numbers.
Each input allows 6 seconds of voice recording.
  • 5 inputs
  • 1 output relay
  • Voice call with text message
  • Audio monitoring 
Technical Spec:
  • GSM Modem Frequency: 900/1800/1900 MHz  
  • Power Supply Voltage: 10-24V AC/DC
  • Inputs: 5
  • Relay Output: 1 
  • Dimensions: 82x63x20mm 
  • Operating Temperature: -20...+55°C



Business hours (UK time)
Monday-Thursday: 09:00-17:00
Friday: 09:00 - 16:30
Saturdays: 11:00-13:00
Sundays: Closed
Answerphone operating outside these hours 
UK Local: 0161 354 5108
UK Local: 0161 660 2544
International: +44 161 354 5108

Trading as GSM Secure™